Msc1G3:Workshop

OMNIPRESENCE <Simulation + Prototype>

Showreel_(CodingGraphic) by P&A LAB, Jia-Rey Chang: 2010-2014+ from P&A LAB on Vimeo.

InteractiveBody 4.0 workshop from P&A LAB on Vimeo.

OMNIPRESENCE (Short Description)

Our goal> To make the unit adjust itself to the wind direction.

Input// We made a sensor that measures the direction of wind. Output// The rotors inside will adjust its angle and rotation to the wind direction.

PRESENTATION (From Component to Organ)

We want to fabricate the wind direction sensor, made with use of the LDR sensors. This device is an integral part of the UMM system used in Omnipresence project.